NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
1668-K104 (Display Mount, SpacePole) Installation Procedure 1. For countertop installation, drill four holes for the mounting bolts in the desired location. Use the SpacePole Mount base as a template for locating the holes. Install the SpacePole Display Mount and secure with screws (4) or bolts (4) included in the hardware pack or with your preferred fasteners.
Page 5
1668-K104 (Display Mount, SpacePole) 3. Attach the P–Series POS display to the SpacePole arm by sliding the bracket tabs into the head slots. 4. Tighten the thumbscrews (2) at the bottom of the bracket to secure the display.
Page 6
1668-K104 (Display Mount, SpacePole) 5. Route the cables from the display down the SpacePole Mount and out of the integration tray or the countertop.
Page 7
1668-K104 (Display Mount, SpacePole) 6. Install the Cable Clip to secure the cables. 7. Add the integration tray cover.