Installation And Uninstallation, Starting Up; Installing The Software Tool - Omron K6PM-TH User Manual

3 Initial Setting
3-1 Installation and Uninstallation, Start-
ing up
This section describes how to install and uninstall the software tool and how to start it.
Microsoft .NET Framework 4.7.2 is used to run the software tool.
If .NET Framework 4.7.2 is not installed on your computer, install it as well.
3-1-1

Installing the Software Tool

The procedure for installing the software tool is explained below.
Precautions for Correct Use
Your computer may be set to show a User Account Control message box during installation.
If there is no problem, click the Yes Button.
1
Download the software tool from our website.
https://www.ia.omron.com/k6pm_tool
2
Run "setup.exe" in the downloaded software.
The Select Language dialog box appears.
Precautions for Correct Use
If the following dialog box appears, the same version of the software tool as the installer you
ran has been installed on your computer. If you do not need to reinstall or uninstall the software
tool, click the Cancel Button to close the installation window.
• Explanation of option buttons
Change: Select to change the functions that are installed. Do not use this option because it
Modify: Select to reinstall the software tool.
Delete:
3 - 2
is for future use.
Select to uninstall the software tool.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)