3-2-2
Setting the IP Address of the Main Units with the Software Tool
Establish a One-to-one Connection between the PC and the Main
Units
Connect a PC on which the software tool has been installed one to one with each Main Unit, either
directly or via a hub.
Create New Project
Connect a PC on which the software tool has been installed one to one with each Main Unit, either
directly or via a hub.
1
Start the software tool with the following method.
Select All Programs - OMRON - Thermal condition Monitoring Tool from the Windows Start
Menu. Or double-click the shortcut icon of the Thermal condition Monitoring Tool on the desk-
top.
Additional Information
For details on the screen flow after starting the software tool, refer to A-2 Screen Flow of the
Software Tool on page A-12.
2
When the software tool starts, the following Select the project Dialog Box is displayed.
3
Click the Create Button.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Software tool
Ethernet
One-to-one connection
Thermal monitoring device
K6PM-TH provided
3 Initial Setting
3
3 - 9