Re-Assembly Of Final Driving - Sym Fiddle III 50 Service Manual

9. FINAL DRIVING MECHANISM SYM

RE-ASSEMBLY OF FINAL DRIVING

countershaft
final driving shaft
MECHANISM
Install final driving shaft and final driving gear,
countershaft, and countershaft gear.
final shaft gear
Install the setting pins(2 pins) and new gasket.
dowel pins
Apply with grease onto the oil seal lip of final
7 bolts
driving shaft.
Install the gear box cover and 7 bolts.
(tighten the bolts)
Torque: 2.6~3.0 kgf-m
Install the clutch/sliding driving pulley.
Install the driving pulley, belt and left
crankshaft cover.
Install the rear wheel.
Filling bolt
Add gear oil.
Recommended usage gear oil :SAE
85W-140
(110 cc: standard capacity)
(100 cc: when replacement)
Draining bolt
9-6