Sym Fiddle III 50 Service Manual page 107

SYM 3. LUBRICATION SYSTEM
Check clearance between rotor side face
and pump body.
Limit: below 2.0 mm
Oil Pump Re-assembly
Fixing pin
Oil pump body Drive shaft
Install inner and outer rotors into the pump
body.
Align the indent on driving shaft with that of
inner rotor. Install the driving shaft.
Install the oil pump cover and fixing pin
properly and then tighten screw. (1 screw)
Oil pump
inner rotor
outer rotor
cover
Pump driving gear
Oil Pump Installation
Install according to the reverse procedure of
removal.
Screws×2
3-5