Whirlpool RF377PXY Use And Care Manual page 36

Self-cleaning electric range
Hide thumbs Also See for RF377PXY:
Table of Contents

Advertisement

PROBLEM
Cooklng results
are not what
you expected
The display ls
flashlng '88:88"
'F2" shows ln
the display
POSSlBLE CAUSE
The range is not level.
The oven temperature is too low
or too high.
The oven was not preheated
before baking.
The recipe has never been
tested or is not from a reliable
source.
The pan used is not the type or
size recommended in the recipe.
There is not proper air circulation
around pan when baking.
Cooking utensil does not fit the
surface unit being used.
There has been a power failure.
soLUllON
Level range. (See Installation Instruc-
tions.)
See page 14 for instructions on how to
adjust the Oven Temperature Control.
Preheat oven when called for in recipe.
Use only tested recipes from a reliable
source.
Refer to a reliable cookbook for recom-
mended pan type and size.
Allow 1 M to 2 inches (4-5 cm) of air space
on all sides of pan.
Pan should be the same size or slightly
larger than surface unit being used.
Reset the clock (See page 11.)
Call for service. (See Step 3 on page 37.)
36

Advertisement

Table of Contents
loading

Table of Contents