Table of Contents
Advertisement
4.
5.
If a deaning cycle other than 3 hours is
desired, use the Hour and Minute pads to set
the desired cleaning time. Push the 'up' (A) or
'down' (r) pad(s) until a time between 2-4
hours shows in the display.
l
Use 2 hours for light soil.
l
Use 34 hours for moderate to heavy soil.
Push the StartEnter pad. The Clean Time
Indicator Lght will stay on to show that the
oven is programmed for the Self-Cleaning
cycle.
Skip to Step 6 if you want the SelfCleaning
cyde to start now.
To delay the start using Stop Time:
Set both the Oven Selector and Oven Tem-
perature Control Knob to CLEAN. Push the
Stop Time pad. The Clean Time Indicator Light
will flash and the Stop Time Indicator Light will
light up. Use the Hour and Minute pads to set
the desired stop time. Push the YIP'
(A)
or
"down' (r) pad(s) until the correct time shows
in the display. The oven will automatically
compute the delay start time by subtracting the
set cleaning time from the set stop time.
DELAY
Push the Start/Enter pad. The display will go
back to showing the current time of day. The
Delay Indicator LigM will light up and the
Clean Time and Stop Time Indicator Lights will
flash to indicate that the oven is programmed
to start the Self-Cleaning cyde at a later time.
When the start time is reached, the Delay
Indicator Light will go off, the Clean Time
Indicator Lght will light up (stop flashing) and
the oven will start to dean.
To delay the start uslng Start Time:
Set both the Oven Selector and Oven Tem-
perature Control Knob to CLEAN. Push the
Delay Start Time pad. The Clean Time
Indicator Light will flash and the Start Time
Indicator Light will light up. Use the Hour and
Minute pads to set the desired start time. Push
the Qp (A) or 'down' (r) pad(s) until the
correct time shows in the display.
Push the Start/Enter pad. The display will
go back to showing the current time of day.
The Delay Indicator tigM will light up and the
Clean Time and Start Time Indicator Lights will
flash to indicate that the oven is programmed
to start the Self-Cleaning cyde at a later time.
When the start time is reached, the Delay
Indicator Light will go off, the Clean Time
Indicator Lght will light up (stop flashing) and
the oven will start to dean.
DELAY
29
Advertisement
Table of Contents
