Table of Contents
Advertisement
7. Push the Stop Time pad. The time of day with
the colon flashing will show in the display, the
Stop Time Indicator Light will light up, and the
Start Time Indicator LigM will flash.
8. Use the Hour and Minute pads to set the
desired stop time. Push the "up' (A) or
=down' (V) pad(s) until the correct time
shows in the display.
This example shows a desired stop time of
230. This provides a cook time of 30 minutes
(the difference between the start and stop
times).
NOTE: If you do not set a stop time within
5 minutes, the display will return to the time
of day.
9. Push the StartEnter pad. The Delay Indicator
Liiht will light up in the display to indicate that
the oven is programmed to start at a later
time. The Start Time and Stop Time Indicator
Lights will flash.
NOTE: You can change a time setting after
pushing the Start/Enter pad without pushing
the Start/Enter pad again.
10. When the start time is reached, the Delay
Indicator Light will go off, a single tone will
sound and the display will count down the
baking/roasting time in minutes. The example
at right shows a baking/roasting time of 30
minutes (the difference between the stop and
start times).
11. When the baking/roasting time is completed,
the oven will turn off automaticalty, beep four
times, and "End" will show in the display. You
will also hear two tones once every minute
until you push the Off/Cancel pad.
NOTE: To disable the reminder tones, push
and hold the Timer Set pad for 4 seconds. To
reactivate the tones, repeat this procedure.
22
Advertisement
Table of Contents
