Whirlpool RF377PXY Use And Care Manual page 24

7. Push the Stop Time pad. The time of day with
the colon flashing will show in the display, the
Stop Time indicator LigM will lght up, and the
Cook Time Indicator Light will flash.
8. Use the Hour and Minute pads to set the
desired stop time. Push the "up' (A) or
'down' (V) pad(s) until the correct time
shows in the display.
This example shows a desired stop time of
230. The oven will automatically start
cooking at 2330 (the set stop time minus the
set cook time).
NOTE: ff you do not set a stop time within
5 minutes, the display will return to the time
of day.
9. Push the Start/Enter pad. The Delay Indicator
Light will light up in the display to indicate that
the oven is programmed to start at a later
time. The Cook Time and Stop Time Indicator
Lights will flash.
NOTE: You can change a time setting after
pushing the Start/Enter pad without pushing
the Statinter pad again.
10. When the start time is reached, the Delay
Indicator Lght will go off, a single tone will
sound and the display will count down the
baking/roasting time in minutes.
24