Planet Networking & Communication CS-2000 Quick Installation Manual page 9

STEP 6:
Click on System function and click on Date/Time function in Configure.
Enter the following setting in Date/Time setting: (Figure-4)
Select Enable synchronize with an Internet time Server.
Set offset hours from GMT: +8 for example
Enter the Server IP/Name: 140.100.1.10 for example
Enter Update system clock time: 0 for example
Click OK.
STEP 7:
Click on the Policy tab from the main function menu, and then click on Outgoing (LAN
to WAN) from the sub-function list.
STEP 8:
Click on New Entry button.
Figure-4 Date/Time Setting