External Insulating Requirements - Trane Climate Changer M Series Installation Operation & Maintenance

External Insulating Requirements

NOTICE
Microbial Growth!
Wet interior unit insulation can become an amplification site for microbial growth (mold), which
may cause odors and damage to the equipment and building materials. If there is evidence of
microbial growth on the interior insulation, the insulation should be removed and replaced prior
to operating the system.
The following areas should be specifically addressed, as applicable:
•
•
•
•
•
•
CLCH-SVX03C-EN
Supply and return water piping connections
Supply and return refrigerant piping connections
Condensate drain lines and connections
Outdoor-air-intake duct connections
Discharge duct connections
Special requirements for low-temperature-air systems
External Insulating Requirements
81