Sharp KSH-Q11 Service Manual page 6

1. Remove the bottom lid in accordance with "REMOVE OF BOTTOM LID".
2. Disconnect 2 terminals from the micro SW.
3. Remove the screw holding the micro SW. from the SW. angle.
4. Now the micro SW. is free.
Screw
SW. angle
1. Remove the bottom lid in accordance with "REMOVE OF BOTTOM LID".
2. Remove the micro SW. in accordance with "REMOVE OF MICRO SWITCH".
3. Use to pliers pull the stop ring holding the switch lever ass'y from the thermostat rod.
4. Remove the screw holding the switch angle ass'y from the reflector.
5. Remove the switch lever ass'y from the thermostat ass'y and push inward the switch lever ass'y into the
outer pot and remove from the outer pot.
6. Now the switch lever ass'y is free.
1
Push inward
REMOVE OF MICRO SWITCH
REMOVE OF SWITCH LEVER ASSEMBLY
Micro switch
Cord band
Remove
2
Switch lever ass'y
Reflector
Screw
Fig. 5
Micro SW.
Terminal
Fig. 4
Thermostat
Thermostat rod
Thermostat spring
Outer pot
6
Thermo plate
Stop ring