Manufacturer's Information; Delivery; Packaging; Transport - GEM 4242 Operating Instructions Manual

8 Manufacturer's information

8 Manufacturer's information

8.1 Delivery

● Check that all parts are present and check for any damage immediately upon receipt.
The product's performance is tested at the factory. The scope of delivery is apparent from the dispatch documents and the
design from the order number.

8.2 Packaging

The product is packed in a cardboard box which can be recycled as paper.

8.3 Transport

1. Only transport the product by suitable means. Do not drop. Handle carefully.
2. After the installation dispose of transport packing material according to relevant local or national disposal regulations /
environmental protection laws.

8.4 Storage

1. Store the product free from dust and moisture in its original packaging.
2. Avoid UV rays and direct sunlight.
3. Do not exceed the maximum storage temperature (see chapter "Technical data").
4. Do not store solvents, chemicals, acids, fuels or similar fluids in the same room as GEMÜ products and their spare parts.

9 Assembly and installation

9.1 Preparations for assembly to the valve

1. Move the actuator to the open position.
2. Remove optical position indicator 2 and / or protective cap 1 from the actuator top.
1
9.2 Mounting kit assembly
Item Name
1 Spindle
2 Spring
3 Operating bush
4 Distance piece
5 O-ring
6 Adapter
* Included depending on version.
Pretensioned spring!
▶ Damage to the device.
Slowly release the tension in the spring.
●
Do not scratch the spindle!
▶ A damaged spindle surface may cause failure of the travel sensor.
GEMÜ 4242
DeviceNet
1
A
Item Name
7 Flange plate
8 Screws
9 Pressure disc*
10 O-ring*
11 O-ring*
CAUTION
CAUTION
16 / 36
2
www.gemu-group.com