Whirlpool FES310Y Use And Care Manual page 20

Setting the controls
1. Make sure the clock has the correct time of
day.
2. Move the Lock Lever to the right -the Clean
position.
NOTE: A 3-hour Clean Time will automatically
appear in the display when you move the Lock
Lever to the Clean position.
3. Set the Oven Selector and Oven Temperature
Control Knob to CLEAN. The OVEN HEAT-
ING Indicator Light will come on.
4. To start cleaning immediately:
If you want a Clean Time other than three
hours, turn the Set Knob until a time between
2-4 hours shows in the display.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to heavy soil.
The Self-Cleaning cycle will automatically start
2 seconds after setting the Lock Lever.
To delay the start uslng Start Time:
Push the Start Time button. Then turn the Set
Knob to set the Start Time you want (up to
11 hours, 59 minutes from the current time
of day).
If you want a Clean Time other than three
hours, turn the Set Knob until a time between
2-4 hours shows in the display.
l
Use 2 hours for light soil.
l
Use 3-4 hours for moderate to heavy soil.
The Self-Cleaning cycle will start when the
Start Time is reached.
NOTE: You must set the new Clean Time
within one minute after setting the Lock Lever
or setting a Start Time. If you do not, you must
move the Lock Lever back to the left and back
to the right again before entering the Clean
Time.
20