Install Cabinet Side Trims - Fisher & Paykel RS2484WR Installation Manual

Install parts Dual adhesive strips are pre-attached at four locations along the side trim.
Cabinet side trim
(2)
Tools
Cross-head screwdriver
Cutter
56

INSTALL CABINET SIDE TRIMS

1 Peel off the liners from the
dual adhesive strips (A).
A
2 Position the trim (B) at an
angle on the throat of the
door hinge (C).
b
c
d
e
e
F
F
3 Hold the same angle and
slide the side trim bottom
end behind the lower
hinge down to the bottom
drawer side. (D)
4 Slide the side trim top end
behind the top hinge.
5 Slot the side trim behind
the top hinge pocket. (E)
6 Press the adhesive strip to
the cavity to ensure the
trim is also tight against the
inner face of the appliance.
7 On the non-hinge side,
slide in the side trim behind
the top trim. (F)