Bosch OVEN Installation Instructions Manual page 15

8. Strip 3/8 (9.53 mm) inches of insulation from the end of the wire.
9. Insert the insulated grounding wire into the lug below the terminal block.
10. Insert stripped end of white wire into the center lug. Secure the clamping-
screw.
lug
wire
11. Insert stripped end of red wire into the left lug. Secure clamping screw.
12. Insert black wire into the right lug. Secure clamping screw. Tighten each
clamping screw with the appropriate torque (see table).
Table 3: Appropriate Torque Levels for Aluminum or Copper Wire
Gauge Torque (in./lbs.)
6 35
8 25
13. Properly secure flexible conduit at knockout on angle and at supply side junc-
tion box. The wiring is now complete.
Figure 18:
clamping screw
Figure 17:
Torque (Nm)
3.95
2.82
green
ground
screw
red wire
green ground wire
Completed Four Wire Flexible Conduit Connection
3/8 "
Wire Stripping
Figure 16:
Attaching Wire to Lug
black wire
white wire
English 13