Table of Contents
Advertisement
Control Valve, Dismantling/Assembly
1.
Remove the control valve, see above.
2.
Clean in accordance with "Working
Methods" on page 96.
3.
Place the valve in the vice. Tighten down
on the lower part (under the slider hole).
4.
Remove the check valve. Set the tool to
the wide wrench setting, 15 mm.
5.
Remove lever housing and lever. By
lifting the lever housing and twisting the
lever backwards, it can be unhooked
from the hole in the slider.
6.
Remove the plastic plug and unscrew the
spring holder with a 12 mm Allen key.
HYDRAULIC SYSTEM
Lever housing with lever
Spring holder
Check valve
103
English-
Advertisement
Table of Contents
