Panasonic EP3513CU Operating Instructions Manual page 25

USING THE SELF PROGRAM
Changing Time Settings Part Way through a Massage
1. Open the cover and input the time
settings.
(1) Open the cover and input the time
self program time input
neck/shoulder hands/arms
back
(2) Press
lower back OK
lower body
Advanced Usage
Saving Time by Recording Time Settings
Recording Time Settings
After the massage finishes or
user
When the
Press the User Memory button you
want to record your settings to.
user
When the Selected Button Flashes Rapidly
Rapid Flashing • This indicates that settings have already been recorded using that User Memory button.
user
Beginning a Massage Using Recorded Time Settings
(1) Press .
(2) Press the button used
to record your data.
(3) Press .
Changing Recorded Time Settings
See "Changing Time Settings Part Way through a Massage" above.
settings you want to change.
after completing setting
OK
adjustments.
The program will be reconfigured
to reflect the change(s) made to
settings.
is pressed to finish the massage, proceed as follows.
buttons flash...
Only Pressed Button
Flashes
To record over the existing data, press the same button once more. (The existing data
will be deleted.)
To keep the existing data, press another User Memory button.
user
2. Close the cover.
• If the cover is left open, you will be unable
to use the Leg Stretch OFF/ON, Back
Vibration OFF/ON, Program Strength or
Focus buttons during the massage.
user
Recording Complete
self program
time
• The recorded time settings will
be displayed.
The program with the recorded
time settings will begin
immediately.
23