Table of Contents
Advertisement
8. TROUBLESHOOTING
How to Reset Built-In IC (System Reset)
●
If the watch should function improperly, follow the procedure below to reset the built-in IC (system reset). It will return to normal. After the system
reset is performed, the time/calendar returns to its default setting. Be sure to set the time/calendar properly before use.
[ Any mode ]
Ex.) TIME mode
Ⓐ
Button
Button
Press and hold both
Button
at the same time for more
than 10 seconds
■
Operation Method
①
Press and hold both Buttons
more than 10 seconds in any mode, TIM E, CONNECT or COUNT-
UP. The built-in IC is reset (system reset), and the hand position
adjustment function is activated. Then, the second hand turns a
full circle to indicate that it is ready for hand position adjustment.
②
Follow the procedure in "How to Adjust Hand Position" on
to set the hands that are misaligned from the 12 o'clock position
exactly in position.
③
After the hand position adjustment of all the hands is completed,
Ⓐ
press Button
to return to the time display.
※ After the system reset procedure, the watch will not return to
the time display automatically in 3 minutes. The time display
will not appear by turning the rotating bezel to change the
mode to TIME or CONNECT.
[ System reset completed ]
Second hand position adjustment in
hand position adjustment function
Ⓑ
Ⓐ
Ⓑ
and Button
Ⓐ
Ⓑ
and
at the same time for
P . 18
[ Hand position adjustment ]
After adjusting the hand
position following the
procedure in "How to
Adjust Hand Position" on
P.
18, return the display
to the time.
※ When the time display resumes, the watch starts indicating the
time from the default setting below:
Time
Calendar
④
If you have your smartphone at hand, and the time synchronization
with the dedicated application via Bluetooth communication is
available, perform the manual reception to set the time/calendar
properly. (Refer to "Manual Reception" on
⑤
If you cannot use your smartphone, and the time synchronization
with the dedicated application via Bluetooth communication is
not available, manually set the time/calendar properly on the
watch alone. (Refer to "How to Adjust Time Manually" on
and "How to Adjust Calendar Manually" on
27
Follow the procedure
If Bluetooth
in "Manual Reception"
communication
on
P. 12
to set the time/
is available
calendar properly.
Follow the procedure
in "How to Adjust Time
Manually" on
P. 14
"How to Adjust Calendar
If Bluetooth
Manually" on
P. 16
communication
manually set the time/
is not available
calendar properly.
: AM12 ： 00 ： 00
: January 1st, with the number of years
elapsed from leap year "0"
P .
12.)
P .
16.)
and
to
P . 14
Advertisement
Table of Contents
