Table of Contents
Advertisement
8. TROUBLESHOOTING
How to Reset Built-In IC (System Reset)
●
If the watch should function improperly, follow the procedure below to reset the built-in IC (system reset). It will return to normal. After the system
reset is performed, the time/calendar returns to its default setting. Be sure to set the time/calendar properly before use.
[ Any mode ]
Ex.) TIME mode
Ⓐ
Button
Ⓑ
Button
Ⓒ
Button
Press and hold
Buttons
at the same time
for more than 10 seconds
■
Operation Method
①
Ⓐ
Press and hold Buttons
,
than 10 seconds in TIME mode, CALENDAR mode or PART DUAL
TIME mode. The built-in IC is reset (system reset), and the hour
hand and minute hand continue moving for a while. Then, the
hour hand and minute hand move to the 12 o'clock position to
indicate that it is ready for minute hand position adjustment.
②
Follow the procedure in "How to Adjust Hand Position" on
to set the misaligned hands exactly in position.
③
After the hand position adjustment of all the hands is completed,
Ⓑ
press Button
to return to the time display.
※ After the system reset procedure, the watch will not return to
the time display automatically in 3 minutes.
[ System reset completed ]
Minute hand position adjustment in
hand position adjustment function
Ⓐ
Ⓑ
Ⓒ
,
and
Ⓑ
Ⓒ
, and
at the same time for more
P . 20
[ Hand position adjustment ]
After adjusting the hand
position following the
procedure in "How to
Adjust Hand Position"
o n
P. 2 0
, r e t u r n t h e
display to the time.
※ When the time display resumes, the watch starts indicating the
time from the default setting below:
Time
Calendar
Part dual time : AM12 ： 00 ： 00
④
If you have your smartphone at hand, and the time synchronization
with the dedicated application via Bluetooth communication is
available, perform the manual reception to set the time/calendar
properly. (Refer to "Manual Reception" on
⑤
If you cannot use your smartphone, and the time synchronization
with the dedicated application via Bluetooth communication is
not available, manually set the time/calendar properly on the
watch alone. (Refer to "How to Adjust Time Manually" on
and "How to Adjust Calendar Manually" on
29
Follow the procedure in
If Bluetooth
"Manual Reception" on
communication
P. 12
to set the time/
is available
calendar properly.
Follow the procedure
in "How to Adjust Time
Manually" on
and "How to Adjust
If Bluetooth
Calendar Manually"
communication
on
P. 17
to manually
is not available
set the time/calendar
properly.
: AM12 ： 00 ： 00
: January 1st, Sunday, with the number of
years elapsed from leap year "0"
P .
12.)
P .
17.)
P. 14
P . 14
Advertisement
Table of Contents
