Grizzly G0636X Owner's Manual page 53

6.
Place your coplanarity gauge up against both
wheels in the positions shown in Figure 64.
3-1/2"
70"
Side View
Figure 63. Dimensions of coplanarity gauge.
Coplanarity
Gauge
Tracking
Knob
Wheels
Adjustment
Hub
Figure 64. Checking for coplanarity.
Model G0636X (Mfd. Since 09/18)
17"
36"
1-1/2"
17"
Gauge Positions
7.
Adjust tracking knob to get both wheels paral-
lel. If wheels won't go parallel to each other,
then move lower wheel at adjustment hub
(see Figure 65) so they line up.
Top Tilt
Side
Tilt
Bottom Tilt
Figure 65. Lower wheel adjustment control.
8.
If wheels will go parallel but not coplanar,
shim upper wheel out as needed using thin
⁄ " washers on shaft behind wheel.
3
4
Side
Tilt
-51-