Grizzly G0636X Owner's Manual page 47

Table Tilt Rack & Pinion Assembly
1. DISCONNECT MACHINE FROM POWER!
2.
With table perpendicular to blade, wipe off
all existing grease and sawdust buildup from
rack.
3.
Move table up to its maximum 45˚ angle and
wipe (see Figure 56) off all existing grease
and sawdust buildup from rack.
Figure 56. Table tilt rack and pinion assembly.
4. Apply a thin coat of light all-purpose grease to
rack.
5.
Move table up and down several times to
distribute grease, then wipe off any excess
grease.
Model G0636X (Mfd. Since 09/18)
Trunnions
1. DISCONNECT MACHINE FROM POWER!
2.
Move table up until it reaches its maximum
45˚ angle and wipe off all excess grease and
sawdust from trunnions.
3.
Apply a thin coat of light all-purpose grease to
trunnions (see Figure 57).
Figure 57. Trunnion lubrication location.
4. Move table down and then back up to distrib-
ute grease, then wipe off any excess grease
from trunnions.
-45-