Grizzly G0636X Owner's Manual page 46

Blade Guide Rack & Pinion
1. DISCONNECT MACHINE FROM POWER!
2.
Lower blade guide until it reaches table.
3.
Wipe off existing grease and sawdust buildup
on rack (see Figure 54).
Figure 54. Rack lubrication location.
4.
Apply a thin coat of light all-purpose grease to
rack.
5.
Move blade guide up and down several times
and remove any excess grease to help pre-
vent sawdust buildup.
Blade Tracking Knob
1. DISCONNECT MACHINE FROM POWER!
2.
Unscrew blade tracking knob 5 turns.
3.
Wipe off any existing grease and sawdust
buildup on threads.
4.
Apply a few dabs of a light all-purpose grease
to threads.
5. Re-adjust tracking (see Blade Tracking on
Page 19).
-44-
Tension Adjustment Assembly
1. DISCONNECT MACHINE FROM POWER!
2.
Open top wheel cover and look through top of
wheel.
3. Wipe off any existing grease and sawdust
buildup on blade tension adjustment assem-
bly and tension lever cam.
4.
Apply a thin coat of grease to tension adjust-
ment assembly and tension lever cam (see
Figure 55).
Figure 55. Tension adjustment assembly
locations (top wheel removed for clarity).
Model G0636X (Mfd. Since 09/18)