Battery Replacement; Before Attempting To Remove The Battery; Swap Battery Mode - Honeywell Dolphin CT60 Series User Manual

Battery Replacement

If your battery power is low, you need to either charge the battery in the computer
or replace it with a charged battery.
Warning: If you have a CT60 model certified for use in hazardous

Before Attempting to Remove the Battery

Before removing the battery, always do one of the following:
•
•

Swap Battery Mode

Swap Battery mode places the computer in a lower power state so that the battery
can be removed for a short time. This feature in not available on all models.
To activate Swap Battery mode:
1. Press and hold the Power button until the options menu appears.
2. Touch Swap Battery and follow the on-screen instructions.
3. Once you replace the battery, press the Power button.
Dolphin CT60 Mobile Computer
locations, read
Power off the computer.
Place the unit in Swap Battery mode. Swap Battery mode places the computer in
a low power state so that the battery can be removed for a short time.
Important Information on page 5.
7