Turn Power On/Off; Battery Replacement - Honeywell CT30 XP Series Quick Start Manual

About the USB Type C Connector (model dependent)
You can use a USB cable to charge the mobile computer from a
host device (e.g., laptop or desktop computer). The connected
host device must supply a minimum power output of 5V, 0.5A to
the CT30 XP or the battery will not charge.

Turn Power On/Off

The first time you power on the computer, a Welcome screen
appears. You can either scan a configuration barcode or use the
Wizard to manually set up the computer. Once setup is
complete, the Welcome screen no longer appears on startup
and Provisioning mode is automatically turned off (disabled).
To turn the computer on:
• Press and hold the Power button for approximately 3 seconds
and then release.
To turn the computer off:
Press and hold the Power button until the options menu
1.
appears.
2. Touch Power Off.

Battery Replacement

Before removing the battery, always do one of the following:
• Power off the computer.
• Place the unit in Swap Battery mode.
10