Replace The Battery - Honeywell Dolphin CT60 Series User Manual

Replace the Battery

Warning: If you have a CT60 model certified for use in hazardous
1. Depending on your model type, either power off the CT60 or place the unit in
2. Disconnect one end of the hand strap from the computer.
3. Press and hold down the small button on the battery latch, and then slide the
8
locations, read
Swap Battery mode. To learn how, see
latch toward the bottom of the computer to unlock the battery.
Important Information
Swap Battery
on page 5.
Mode.
Dolphin CT60 Mobile Computer