About Ct60 Models For Use Hazardous Locations (Ct60-L0N-Xsxxx1E, Ct60-L1N-Xsxxx1E); Charge The Battery Before Use - Honeywell Dolphin CT60 Series User Manual

About CT60 Models for use Hazardous Locations
(CT60-L0N-xSxxx1E, CT60-L1N-xSxxx1E)
Warning: Explosion Hazard-Batteries must only be changed or charged
Avertissement: Risqued'explosion-Les batteries doivent uniquement
Warning: Battery must be locked when using the CT60 in a hazardous
Avertissement: La batterie doit être verrouillée lors de l'utilisation du
Warning: Additional spare batteries must not be carried in the hazardous
Warning: The device must be protected from impacts with high impact

Charge the Battery Before Use

Dolphin CT60 computers ship with the battery significantly discharged of power.
Fully charge the battery before using your computer for the first time.
You can charge the battery with a Dolphin CT50 series charging accessory before
or after you install the battery in the computer. A fully discharged battery charge in
approximately 6 hours.
To charge the battery before you install it in the computer:
•
To charge the battery after installing it in the computer:
•
Note: Using the computer while charging the battery increases the time required to reach
a full charge.
6
in an area known to be non-hazardous. Use ONLY Honeywell
CT60 battery part number 318-055-013 or 318-055-016.
être remplacées ou rechargées dans un endroit non dangereux.
Utilisez UNIQUEMENT Honeywell CT60 batterie P/N 318-055-
013 or 318-055-016.
environment.
CT60 dans un environnement dangereux.
area.
energy, permanent UV light emission and high electrostatic
discharge processes.
Insert the battery into the Honeywell Quad Battery Charger or the battery well of
a CT50 HomeBase or eHomeBase.
Insert the computer into a CT50 HomeBase, eHomeBase, ChargeBase, NetBase,
USB Adapter, or Vehicle Power Adapter.
Dolphin CT60 Mobile Computer