Rename Or Unpair A Paired Device; About The Scanner Edge App; Connect A Bluetooth Scanner - Honeywell Dolphin CT60 Series User Manual

3. Tap Device Name to change the device name. Type the new name and then tap

Rename or Unpair a Paired Device

You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:

About the Scanner Edge App

Your mobile computer is equipped to communicate with scanners using Bluetooth
technology through the Scanner Edge app. The Bluetooth radio must be turned on.
System bar icons indicate Bluetooth radio status.
To turn on the Bluetooth radio:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. If necessary, tap Off

Connect a Bluetooth Scanner

To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing bar code with the Bluetooth scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
Dolphin CT60 Mobile Computer
Rename.
> Connected devices > Previously connected devices >
Bluetooth.
next to the paired device.
• To rename the device, type the new name, and then tap OK.
To allow Internet connection sharing or Contact Sharing, tap the check box
•
next to the setting.
• To unpair the device, tap Forget.
> Connected devices > Connection preferences > Bluetooth.
to toggle the Bluetooth radio On
.
and then tap Pair BT Scanner.
.
75