Advertisement
Quick Links
3950 NW 120
The NAV-TV DIFF-CAM Switcher is used to interrupt the factory differential rear-cam video
signals to input an aftermarket video source to the factory LCD screen. It's activated via an
external toggle switch (not included).
VSW Board
NTV-ASY187
VSW Power Harness
NTV-HAR066
:
Agreement
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
th
Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
www.nav-tv.com
info@nav-tv.com
DIFF CAM-Switcher
NTV-KIT437
Overview
Kit Contents
NTV-DOC149
DIFF CAM Board
NTV-ASY221
Main Harness
NTV-HAR243
BHM
11/17/16
rB5
1 |
P a g e
Advertisement
Related Manuals for Nav TV DIFF CAM-Switcher
Summary of Contents for Nav TV DIFF CAM-Switcher
- Page 1 3950 NW 120 Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com DIFF CAM-Switcher NTV-KIT437 Overview The NAV-TV DIFF-CAM Switcher is used to interrupt the factory differential rear-cam video signals to input an aftermarket video source to the factory LCD screen. It’s activated via an external toggle switch (not included).
- Page 2 11/17/16 NTV-DOC149 VSW Harness pin outs Input/Output Connector Input from car Output to PIN # Description Color screen DIFF Video IN (-) White/Purple Video IN - (car side) White/Orange Video OUT - (screen side) Orange DIFF Video IN (+) Purple Video IN + (car side) White/Blue Video OUT + (screen side)
- Page 3 11/17/16 NTV-DOC149 Diff Cam R1 pin outs Description Color 12v Out Ground Black Manual Activation Blue Constant Yellow [Shield] [Signal] DIFF Video (-) White/Violet DIFF Video (+) Violet General Installation (not vehicle specific) 1. Remove the radio from the dash, disconnect all factory harnesses and set aside. 2.
- Page 4 11/17/16 NTV-DOC149 9. After connecting cameras/video sources, reconnect the factory radio and test for proper operation. Basic installation diagram (not vehicle specific) Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
- Page 5 11/17/16 NTV-DOC149 MY FORD TOUCH Installation Notes Be certain that forced factory camera operates normally with the Blue wire (touch temporarily to 12v +) from the F-CAM kit before beginning this process. Refer to the diagram on page 6 and make connections. ...
- Page 6 11/17/16 NTV-DOC149 FORD Install Diagram (requires F-CAM kit) Agreement End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger entertainment only.