Table of Contents
Advertisement
• The original card can also be used to perform an undo procedure (SP 5873 002). Before you
store an SD card, label it carefully so it can be identified easily if you need to do the undo
procedure (see below)
Undo Exec: Restoring Applications to the Original SD Cards
1.
Turn the machine OFF.
2.
Put the SD cards into the SD card slots:
SD Card
Source (with copied application.)
Target (original SD card)
3.
Turn the machine ON.
4.
Do SP5873-002 (Undo Exec).
5.
Obey the prompts on the operation panel to complete the procedure.
6.
Turn the machine OFF.
7.
Remove the SD card from C2.
8.
Remove the restored SD card from C3.
9.
Insert the restored SD card into C2.
10.
Turn the machine ON.
11.
Do SP5990-005 (Diagnostic Report) and make sure the program runs correctly.
Wireless LAN G813 (802.11b)
Accessory Check
Check the accessories and their quantities against this list:
Description
1. IEEE 801.11b Board
2. PCI Card
3. Cover Cap
Slot
C2
C3
Qty
1
1
1
MFP Options
1
113
Advertisement
Table of Contents
