Table of Contents
Advertisement
3. Replacement and Adjustment
1.
Pressure arm [A]
• Insert the tips of two screwdrivers and press down to release.
3
2.
C-clamps [B] (both ends)
3.
Drive gear [C]
4.
Bushings (both ends) [D]
5.
Bearings [E]
6.
Hot roller [F]
7.
Entrance guide plate [A] ( x 2)
8.
Pressure roller [B] ( x 2)
• The pressure roller and pressure roller bearing should always be replaced together.
188
Advertisement
Table of Contents
