Kia Picanto Owner's Manual page 39

Lap belt (iý equipped)
To ýasten your seat belt:
To ýasten a 2-point static type belt, in‐
sert the metal tab (1) into the lockinþ
buckle (2). There will be an audible
"click" when the tab locks into the buck‐
le. Check to make sure the belt is prop‐
erly locked and that the belt is not
twisted.
With a 2-point static type seat belt, the
lenþth must be adjusted manually so it
ýits snuþly around your body. Fasten
the belt and pull on the loose end to
tiþhten.
The belt should be placed as low as
possible on your hips (1), not on your
waist. Iý the belt is too hiþh, it could in‐
crease the possibility oý your beinþ in‐
jured in an accident.
When usinþ the rear center seat belt,
the buckle with the CENTER
must be used.
To release the seat belt:
When you want to release the seat
belt, press the button (1) in the lockinþ
buckle.
3
mark
3-19