User Interface
3.2 System Configuration
3.2.2
Configuration-Options-Controllers
When using a RS 485 multidrop network, it is necessary to specify how many controllers are
connected to the PC. Using this window it is possible to configure the total number of ATC, and
to give a name to each of them. In case one controller is not to be accessed, it is possible to
disable it using the dedicated checkbox.
Total number of configures ATCs
Add a new ATC to the network configuration
Removes the last ATC from the network configuration
Selects the previous / next ATC
Description of the ATC. It is used to identify the controller in the main page, data log, events and more.
Enables / disables the serial communication with the selected ATC
Selected ATC
10
Remote Control Software Manual, Edition 03/2011, A5E02469028-02
ATC5300