Bosch SHV99A Use And Care Manual page 21

Figure 8/Ilus. 8
Figure 9/Ilus. 9
AHAM DW-1 10 Place Setting
Figure 10/Ilus. 10
AHAM DW-1 12 Place Setting
Figure 11/Ilus. 11
20
Operation | Fonctionnement | Funcionamiento
(Loading Your Dishwasher, continued)
B. Loading the Upper Rack
Glasses, cups, plates, bowls, and small
pots may be loaded in many different
positions. Figure 8 shows a typical mixed load
in the upper rack. Figure 9 shows the top rack
load pattern for 10 place settings, and Figure
10 shows load pattern for 12 place settings.
Upper Rack Height Adjustment
The upper rack of your Bosch dishwasher
is adjustable with our exclusive
RackMatic™ adjustment.
Using the RackMatic
To lower the upper rack:
1) Pull the upper rack out of the dish-
washer until it stops rolling.
2) Press the RackMatic™ handles inward,
as shown in Figure 11, and let the rack
drop gently while supporting it with your
hands.
To raise the upper rack:
3) Pull the upper rack out of the dish-
washer until it stops rolling.
4) You do not need to press the
RackMatic™ handles to raise the rack.
Grasp the upper rack by the upper edge
and gently pull it upward, as shown in
Figure 12, until the RackMatic™ handles
lock the rack into position.
5) Before you push the upper rack back
into the dishwasher, ensure that the
rack height is the same on both sides.
Otherwise, the dishwasher door will not
close and the upper spray arm will not
connect to the water circuit.
(Continued on next page)
Figure 12/Ilus. 12
E n g l i s h
Adjustment