Table of Contents
Advertisement
USER INTERFACE
• Occupancy State Override Time: PIV-703
5.
DI Setpoint Setback Active Indicator
symbol displays a brief explanation of the feature.
6.
Info Text: This two line text field may be written from the network, and can be useful for showing additional
information such as the current weather. If not being written from the network, the outdoor air temperature is visible
whenever a sensor is physically connected, or when the thermostat is receiving a valid outdoor temperature reading.
Info text can be customized via CSV-506.
7.
Display Banner: The display banner contains the current date and time, and may contain the device name. The device
name is typically used describe what area or unit the thermostat is controlling. The device name can only be changed
using Ubiquity
or an external BACnet configuration tool . The time can be set to display in a 12 hour or 24 hour
TM
format using the Date/Time screen in the Advanced Settings menu. The contents of the banner can be customized
using MSV-505.
8.
Economizer
:
provides a brief explanation of this feature.
9.
Service Status Indicator
symbol navigates to the service status screen where any active service status is viewable. When there are more than
one service status active, a plus sign next to the
10.
Settings: Touching this button navigates to the Settings menu. If an access code has been set, the user will be
prompted to enter the code before they are permitted to proceed to the Settings screens.
information on Setting screens. All programming is done on these screens.
11.
Status: Touching this button navigates to the Status screens.
screens.
Touching and holding the Status button for 5 seconds brings up a dialog asking the user if they would like
to force a device restart. If confirmed, the UbiquiSTAT™ immediately restarts.
12.
About: Touching this button navigates to the About screen. This screen shows product information, such as
versioning and serial number.
4.2
STATUS SCREENS
Touching the Status button on the home screen will bring up the Status screens. These screens display real time
information about the state of the control as well as inputs and outputs. This information is grouped into three sub
screens: system, advanced, and network.
4.2.1 System Status
System Status screen details vary pending on model specific features.
: This symbol is visible when DI Setpoint Setback is active. Touching this
This symbol is visible when the Economizer is active. Touching this symbol
See section 5
: This symbol is visible only when one or more service status is active. Touching this
See section 4.4
for more information about the About screen.
2800 Laura Lane Madison, WI 53562 | 800.288.9383 Fax: 608.836.9044 | www.tcsbasys.com
See section 5
for an explanation of this feature.
for an explanation of this feature.
symbol.
See section 4.3
See section 4.2
for more information on service status.
See section 4.5
for more information on the Status
Figure 5
for more
15
Hide quick links:
Advertisement
Table of Contents
