Download
Share
Print this page
TCS UbiquiSTAT Quick Setup Manual
  1. Manuals
  2. Brands
  3. TCS Manuals
  4. Controller
  5. UbiquiSTAT
  6. Quick setup manual

TCS UbiquiSTAT Quick Setup Manual

Commercial bacnet controller
Hide thumbs Also See for UbiquiSTAT:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
|
Quick Setup Guide
UbiquiSTAT
Commercial BACnet Controller
2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
202211

Advertisement

loading

Related Manuals for TCS UbiquiSTAT

Summary of Contents for TCS UbiquiSTAT

  • Page 1 Quick Setup Guide UbiquiSTAT Commercial BACnet Controller 2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com 202211...
  • Page 2 UbiquiSTAT Installation Manual for more information.) Use the Startup Wizard when setting up the UbiquiSTAT for the first time or after resetting it to factory defaults. All controls are disabled until after completing the Startup Wizard. The Startup Wizard will guide you through the following settings: •...

  • Page 3: Using The Startup Wizard

    Using the Startup Wizard After applying power to the UbiquiSTAT and assembling it for the first time, you will see the INITIAL SETUP screen directing to you touch the screen in order to continue. STEP 1 Touch the INITIAL SETUP screen. This will advance you to the next screen.
  • Page 4 STEP 6 On the THERMOSTAT TYPE screen, select whether the UbiquiSTAT is controlling a CONVENTIONAL equipment or a HEAT PUMP. Press the NEXT button to save the settings and advance you to the next screen.
  • Page 5 STEP 8 On the FAN MODE screen, select among AUTO, ON, AUTO + RECIRCULATION, or COOL (conventional only). Press the NEXT button to save the settings and advance you to the next screen. Fan Mode (Conventional HVAC System) Fan Mode (Heat Pump HVAC System) STEP 9 On the COMMUNICATION MODE screen, select among TCSbus, BACnet MS/TP, BACnet Wi-...
  • Page 6 STEP 9, you will see the NETWORK ADDRESS screen. Use the keypad to enter a unique network address for the UbiquiSTAT. This number must be unique across the entire network. Press the NEXT button to save the settings and advance you to the next step.

  • Page 7: Restoring To Factory Defaults

    Wizard and return you to the HOME screen. Restoring to Factory Defaults To restore the UbiquiSTAT to factory default settings, perform the steps outlined in this section. This procedure will reset all programming changes and cannot be undone. STEP 1 On the HOME screen, Press the SETTINGS button in the main menu.
  • Page 8 Press the LOAD button to confirm your desire to reset the UbiquiSTAT (this cannot be undone). You will then return to the “INITIAL SETUP” screen.