Description Of Hot-Tap Alignment Tool For Pipe Sizes Dn 300 - Dn 1200 - Siemens SITRANS F US SONOFLO SONOKIT Manual

SITRANS F US SONOFLO
Description of
hot-tap alignment
tool for pipe sizes
DN 300 - DN 1200
For use on pipe sizes in the range DN 300 to DN 1200
(1)
(2)
(3)
(4)
(5)
(6)
(7)
24
    
(4)
(2)
(5)
Cradle for mounting on the pipe after the transducer locations have been marked
Awe used to position the cradle
Centre holder for mounting on the cradle to keep the alignment barrels in the right position
Adaptor to keep the transducer holder in the right position before the welding. Two pcs are
supplied
Holders to keep the vertical rods and the rods holding the transducer in the right position
during installation
The cradle can be tack welded onto the pipe. On non weldable pipes, use the enclosed
webbing spanners
Alignment rods - 8 pcs in set
Ø = 25 mm, L = 500 mm
Siemens Flow Instruments code no. FDK:085B5393
SFIDK.PS.029.Y1.02
(3)
(1)
(7)
(6)