Table of Contents
Advertisement
SITRANS F US SONOFLO
Tools for hot-tap
installation
Description of
hot-tap drilling
adaptor
For use up to maximum 15 bar line pressure
(1)
(2) & (3)
(4)
(5)
(6)
(4)
Drill cylinder for mounting on to the valve from lock tool
Stainless steel drill rod for 50 mm and 160 mm transducers
The drill is screwed on to the end with the thread M13 and the other end is connected to a
hand-held drilling machine
SANDVIK holesaw (drill). Four pcs are supplied with the adaptor. SANDVIK holesaws are
supplied from SANDVIK AB in Sweden
Type of drill Sandflex 3830-25-VIP ø25
Flat gasket between drill cylinder and valve. Four pcs code No. FDK:085B0903 are supplied
with the machine
O-ring for sealing between drill cylinder and drill rod
Twenty pcs code No. 991X5086 are supplied with the machine
Siemens Flow Instruments code no. FDK:085B5392
SFIDK.PS.029.Y1.02
(5)
(1)
(6)
(2)
(3)
23
Advertisement
Table of Contents
