Omron G9SX Series Manual page 6

Accessories
Terminal Block
Appearance *
Terminal Block with screw
terminals (3-pin)
Terminal Block with screw
terminals (4-pin)
Terminal Block with spring-
cage terminals (3-pin)
Terminal Block with spring-
cage terminals (4-pin)
Note: The G9SX main unit comes with a terminal block as standard equipment. The accessories shown here can be ordered as a replacement.
* The illustrations show 3-pin types
Specifications
Ratings
Power input
Item
Rated supply voltage
Operating voltage range
Rated power consumption *
* Power consumption of loads not included.
Inputs
Item
Safety input
Feedback/reset input
* Provide a current equal to or higher than that of the minimum applicable load of the connected input control device.
Outputs
Item
Instantaneous safety output *1
OFF-delayed safety output *1
Auxiliary output
*1. While safety outputs are in the ON state, the following signal sequence is output continuously for diagnosis. When using the safety outputs as
input signals to control devices (i.e. Programmable Controllers), consider the OFF pulse shown below.
Approx. 100 ms
ON
OFF
360 μs max.
*2. The following derating is required when Units are mounted side-by-side.
G9SX-AD322-@/G9SX-ADA222-@/G9SX-BC202-@: 0.4 A max. load current/output
*3. A load current below 1 A DC/output can be used when the following outputs are used.
G9SX-AD322-@/G9SX-ADA222-@: 2 outputs or less
G9SX-BC202-@: 1 output
Expansion Unit Ratings
Item
Rated load
Rated carry current
Maximum switching voltage
Specifications Applicable units
G9SX-AD-@
G9SX-ADA-@
G9SX-BC-@
G9SX-EX-@
G9SX-AD-@
G9SX-ADA-@
G9SX-BC-@
G9SX-EX-@
Model G9SX-AD322-@/ADA222-@
24 VDC
−15% to 10% of rated supply voltage
4 W max.
Model G9SX-AD322-@/ADA222-@
20.4 VDC to 26.4 VDC, internal impedance: approx. 2.8 kΩ *
Model G9SX-AD322-@/ADA222-@
P channel MOS-FET output
Load current:
0.8 A DC max./output *2 *3
PNP transistor output
Load current: 100 mA max./output
Model G9SX-EX-@
250 VAC, 3 A/30 VDC, 3 A (resistive load)
3 A
250 VAC, 125 VDC
Model
Two Terminal Blocks (black) with screw
Y9S-03T1B-02A terminals, and a set of six code marks to
prevent erroneous insertion.
Two Terminal Blocks (black) with screw
Y9S-04T1B-02A terminals, and a set of six code marks to
prevent erroneous insertion.
Two Terminal Blocks (black) with spring-cage
Y9S-03C1B-02A terminals, and a set of six code marks to
prevent erroneous insertion.
Two Terminal Blocks (black) with spring-cage
Y9S-04C1B-02A terminals, and a set of six code marks to
prevent erroneous insertion.
G9SX-BC202-@
3 W max.
P channel MOS-FET output
Load current:
0.8 A DC max./output *2 *3
G9SX
Remarks
G9SX-EX-@
2 W max.
G9SX-BC202-@
G9SX-BC202-@
6