Table of Contents
Advertisement
If a newer version is available, the FW Upgrade button is displayed in the title bar and the Setting text box will display a
message: (!! New F/W Version: XX.XX.XXXX is available.)
Click the FW Upgrade button to download it:
The percent of progress of the download will be indicated. When the download is complete, the following message will
display:
Upload status: Successful
Click the Save button to install the new firmware. The new firmware details will display in the Current Firmware Version
Setting box:
The FW Upgrade button will be hidden until new firmware becomes available.
7.2.6
Reboot & Reset
To access the Reboot and Reset controls:
1
Select System Operation from the Administration submenu and click the Reboot & Reset tab:
Item
Reboot
Now is the default
setting
300 of 359
© NetComm Wireless 2019
Figure 342 – MCU Firmware Upgrade
Figure 343 – MCU Firmware Info
Figure 344 – System Operation
Notes
Reboot turns the router off, then turns it back on and applies the
current configuration.
Depending on the selection in the dropdown list, clicking the Reboot
button will immediately reboot the router or will reboot at a pre-
defined time or schedule.
Now – Click the Reboot button and the router will immediately
reboot after you confirm by clicking OK to reboot.
Time Schedule – Select a pre-defined auto-reboot time schedule rule
from the drop-down list to reboot the router at a designated time.
To define a time schedule rule, go to the Object Definition >
Scheduling > Configuration tab.
Description
User Guide
Advertisement
Table of Contents
