Reboot; Logging Out - NetComm NTC-220 User Manual

Reboot

Figure 159 – Reboot menu option
Note – It can take up to 2 minutes for the router to reboot.

Logging out

To log out of the router, click the
NTC-220 – User Guide
UG01028 v1.2 March 2019
The Reboot option in the System section performs a soft reboot of the router.
This can be useful if you have made configuration changes you want to
implement.
To reboot the router:
1 Click the System menu item from the top menu bar.
2 Click the Reboot button from the menu on the left side of the screen.
3 The router displays a warning that you are about to perform a reboot.
4 If you wish to proceed, click the Reboot button.
5 A warning popup will advise that "It may take 1-2 minutes to reboot your
device. Are you sure you want to continue?"
6 Click OK to continue with the reboot process.
Figure 160 – Reboot confirmation
icon at the top right corner of the web user interface.
169 of 193
© NetComm Wireless 2019