Recovering Back To Default Configuration - Planet GS-4210 Series Quick Installation Manual

6. Recovering Back to Default Configuration
 IP Address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address "192.168.0.100" or reset the
login password to default value, press the hardware-based reset button on the
front panel for about 10 seconds. After the device is rebooted, you can log in the
management Web interface within the same subnet of 192.168.0.xx.
8-Port 10/100/1000T
2-Port 100/1000X SFP Managed Switch
8-Port 10/100/1000T 802.3at PoE
2-Port 100/1000X SFP Managed Switch
802.3at PoE +
Alert FAN
PWR
Figure 6-1: GS-4210-8P2S Reset Button
+ 2-Port 10/100/1000T +
Figure 6-2: GS-4210-8P2T2S Reset Button
GS-4210-16P4C
Console
SYS
Reset PWR
115200, N, 8, 1
Figure 6-3: GS-4210-16P4C Reset Button
1 2 3 4 5 6 7 8
PoE-in-Use
LNK ACT Reset
1000
LNK ACT
PoE-in-Use
LNK
2 4 6 8 10 12
PoE 1000
SYS 1 3 5 7 9 11
PWR Reset
16G 802.3at PoE
2 4 6 8 10 12 14 16
PoE
1 3 5 7 9 11 13 15
LNK ACT PoE-in-Use
ACT
Console
115200,N,8,1
+ 4G TP/SFP Managed Switch
13