Saving The Configuration Via The Console - Planet GS-4210 Series Quick Installation Manual

5. Repeat Step 1 to check if the IP address is changed.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the GS-4210
Managed Switch Series through the new IP address.
If you are not familiar with console command or the related param-
eter, enter "?" anytime in console to get the help description.
Note
5.3 Saving the Configuration via the Console
In the switch, the running configuration file is stored in the RAM. In the current
version, the running configuration sequence running-config can be saved from the
RAM to FLASH by writing the command or copying the running-config startup-
config command, so that the running configuration sequence becomes the startup
configuration file, which is called configuration save.
At the "GS-4210 Series#" prompt, enter "copy running-config startup-
config" as shown in Figure 5-6.
12
Figure 5-6: The Configuration Screen