Planet GS-4210 Series Quick Installation Manual page 11

To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
 Show the current IP address
1. At the "GS-4210 Series#" prompt, enter "show ip".
2. The screen displays the current IP address, subnet mask and gateway as shown
in Figure 5-4.
 Configuring IP address
3. At the "GS-4210 Series#" prompt, enter "configure".
4. At the "GS-4210 Series(config)#" prompt, enter the following command and
press <Enter> as shown in Figure 5-5.
GS-4210 Series(config)# ip address 192.168.1.100 mask 255.255.255.0
GS-4210 Series(config)# ip default-gateway 192.168.1.254
The previous command would apply the following settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-4: IP Information Screen
Figure 5-5: IP Address Screen
11