Table of Contents
Advertisement
5. Repeat Step 1 to check if the IP address has been changed.
If the IP is successfully configured, the Pro AV Switch will apply the new IP
address setting immediately. You can then access the Web interface of the
AVS-4210-24HP4X using the new IP address.
If you are unfamiliar with a console command or its parameters,
you can enter "?" at any time in the console to receive a help
description.
5.3 Saving the Configuration via the Console
In the switch, the running configuration file is stored in RAM. To save the
current running configuration (running-config) from RAM to FLASH memory,
use the command "write" or "copy running-config startup-config".
This process ensures that the running configuration becomes the startup
configuration file, ensuring that your settings are preserved even after the
switch is rebooted.
At the "AVS-4210-24HP4X#" prompt, enter "copy running-config startup-
config" as shown in Figure 5-6.
Figure 5-6: Save the Configuration
15
Advertisement
Table of Contents
