Tools - Husqvarna K 750 Workshop Manual

●
504 91 40-01
Puller
Dismantling the crankshaft's
●
sealing rings in the crankcase.
505 38 17-23
Assembly taper
● Assembly of the crankshaft's sea-
ling ring on the clutch side.
502 50 82-01
Assembly punch
Assembly of the crankshaft's sea-
●
ling rings in the crankcase.
504 90 90-02
Universal puller
● Dismantling the clutch's sup-
port washer on the crank shaft.
● Splitting the crankcase, in com-
bination with 544 06 00-02.
544 06 00-02
Grip plate
Splitting the crankcase, in com-
●
bination with 504 90 90-02.
531 00 48-67
Bearing puller
Dismantling the main
●
bearing from the crankshaft.
544 10 36-02
Bearing press
● Dismantling the main bearing.
● Assembly of the crankshaft.
● Assembly of the clutch's support
washer on the crank shaft.

TOOLS

= Service action
506 37 61-02
Bearing press
● Main bearing assembly.
● Dismantling and assembly of
blade shaft bearing and axle.
504 56 79-01
Bearing press
● Dismantling and assembly of
the clutch drum ball bearing.
502 50 83-01
"Hose catcher"
Tool for catching the fuel hose in
the tank and drawing out the fuel
filter for servicing.
Fuel filter and hose.
●
501 60 02-03
Special screwdriver for the
idle screw
● Adjustment of the idle speed.
18
53