Tools - Husqvarna K 760 Workshop Manual

20
59
●
506 38 26-01
Combination spanner
(Supplied with the machine)
● The vibration dampers' inner
screw, Torx T27. Blade diameter
5 mm.
502 71 27-02
Workshop key Torx T27
● Universal use for all Torx T27,
except the vibration dampers'
inner screw. See the tool above.
502 71 13-01
Test spark plug
Test of the ignition system and
●
the spark plug's function.
502 51 34-02
Air gap gauge
Gauge for the air gap between the
ignition module and the flywheel.
● Assembly of the ignition
module.
502 51 49-02
Flywheel puller
Puller for the flywheel. Fits all
petrol-driven Husqvarna cutters.
Dismantling the flywheel.
●
502 71 14-01
Tachometer
Instrument for measuring the
engine's speed.
● Idle setting.
● Checking the maximum speed.
501 56 27-01
Pressure tester
● Test of carburettor function ality.
● Test of fuel lines.
● Test of non return valve in the
tank ventilation.

TOOLS

= Service action
531 03 16-86
Compression tester
Compression test, cylinder.
●
502 50 70-01
Kit for piston service
Consisting of piston ring compres-
sor, piston stop and sup port plate.
Use piston stop 504 91 06-05 for
K760.
● Piston service.
504 91 06-05
Piston stop
Locks the crankshaft's rotation.
Dismantling the clutch.
●
505 38 17-05
Gudgeon pin punch
● Dismantling and assembling the
gudgeon pin.
531 03 06-23
Pressure tester
Kit consisting of pump with
pressure gauge and nozzles, hose
and sealing plug for universal use.
Leakage testing the crankcase.
●
544 10 33-01
Cylinder seal
Seals for the cylinder's inlet ports,
exhaust ports and plug for the
decompression valve.
● Leakage testing the crankcase.
503 55 22-01
Sealing plug
Replaces the decompression valve.
(Included in 544 10 33-01).
● Leakage testing the crankcase.