Husqvarna K 750 Workshop Manual page 3

1
"Dismantling into Basic Modules"
"Cutting head" (Example)
2
LITERATURE
Workshop manual
K 750
HUSQVARNA CONSTRUCTION PRODUCTS
Workshop Manual
The Workshop Manual includes virtually
all workshop procedures that can come into
question on the K750. Some very simple and
self-evident repairs have been omitted.
Outline
An introductory section with the title
"Dismantling into Basic Modules" shows how
the machine is dismantled into large component
units, for example, the starter, cut ting arm, air
filter, etc.
The manual goes on to describes in detail
through the different chapter how work on the
basic modules should be carried out.
This arrangement means that as a mechanic,
at least until you have learnt the basic composi-
tion of the machine, you need to start with the
chapter "Dismantling into Basic Modules" to
then move on to the chapter covering the speci-
fic service work.
Layout – pictures and text
Besides the pictures and illustrations there is
generally two columns of text. The left-hand text
column is a concise and is suitable for experienced
mechanics, the right-hand column gives a more
detailed description and is targeted at mechanics
with less experience of repair work on the power
cutter.
Contents
The manual is divided into numbered chapters
together with chapter headings that are stated in
bold at the top of each page.
The list of contents also has page refe rences to
the start of each chapter.
Spare parts
Spare parts K750
The folder includes all the spare parts for
Husqvarna K750.
The folder contains complete exploded views
of the entire machine where each component's
placement, spare part number and appearance
can be easily identified.
502 53 08-26