Checking And Adjusting Differential Lock - Husqvarna Rider 18 ProFlex Workshop Manual

Checking and adjusting differential
lock
Check and adjust the differential lock (on the left-
hand side) as follows:
1. Make sure the differential lock is disengaged,
with the pedal fully raised.
2. Adjust so there is zero play between the outer
cable and the adjuster screw, using the two nuts
on the adjuster screw. You should not feel any
play when you pull the outer cable.
3. Tighten the nuts carefully to avoid damaging the
adjuster screw.
Reparation instructions
25
English –