Husqvarna 131RB Workshop Manual page 63

3. Remove the nut (A) and the washers (B and C).
C
4. Remove the engine from the support plate on the
harness frame.
8.16.2 To assemble the harness frame
1. Attach the engine to the support plate on the
harness frame.
2. Attach the washers (B and C) and the nut (A).
C
3. Attach the fuel hose (only on the model967 84 33-
xx).
627 - 002 - 23.04.2018
B
A
B
A
4. Pull up the knob and attach the shaft.
Repair instructions - 63